The Schego temperature controller can be loaded up to 1000 watts and because of its simple handling is ideal both for the hobby aquarium owner and for the professional user. The aquarium heater is simply connected to the socket of the controller and the required temperature is set. The temperature in the aquarium is measured using a temperature probe (12 V).

measuring range +15 ... +35 °C

accuracy ± 0,2 °C

switch capacity 1000 watts

power consumption max. 100 mA

case 120 x 65 x 55 mm

sensor 12 V DC

sensor-cable length 2 m

A European adapter to run more than one heater on the TR 1000
Cable lenght 3 mtr.
You only need a power plug adapter to plug the controller into your own power point.

NOTICE:
The Schego temperature controller can be loaded up to 1000 watts max.

The titanium heating elements from Schego are the optimum supplement to the temperature controller TR 1000. Their power range extends from 50 to 300 watts. They are manufactured from high-quality titanium tube, therefore indestructible and sea water-proof. All Schego titanium heating elements are grounded and correspond to the high safety standard of the VDE (association of German electrical engineers).

---

ONLY 220-250V / 50Hz with an Euro plug

---

Lenght 350 mm.

---

---

very quiet, gently running aquarium pump

easily replaceable air filter

long-life, reliable membrane

transparent housing with suspension.

air output 100 L/H




Schego offers membrane pumps for aeration or use in filter systems and protein skimmers. This guarantees keeping living beings in their natural environment in the aquarium.

---

ONLY 220-250V / 50Hz with an Euro plug

---

---

air output 150 l/h

Watts 5

running noise 41 dB(A)

cable lenght 1,0 m.

---

air output 250 l/h

Watts 5

regulation - running noise 39 dB(A)

cable lenght 1,0 m.

---

The Optimal and M2K3 pumps in DELUXE version can be adapted exactly corresponding to the required air volume by means of a potentiometer. A switch enables the pump to be simply switched on and off, if no continuous operation is required.

The pumps WS2 and WS3 have been developed for special applications such as water decorative columns or protein skimmers. They offer a higher pressure (WS2 at least 2 m, WS3 at least 3 m water column).

---

ONLY 220-250V / 50Hz with an Euro plug

---

air output 350 l/h

Watts 5

regulation

running noise 36 dB(A)

cable lenght 1,0 m .

---

---

---

---

---

Membrane pumps for battery connection 12 V DC

air output 150 l/h

type of current 400 mA

cable lenght 1,0 m

case 130 x 70 x 50 mm




Schego pumps for battery connection enable a supply of oxygen where no mains power is available.

These pumps were developed originally for fish and living fodder transport. Fish suffer from lack of oxygen during lengthy transport, especially in the summer months, so that the tanks must be aerated. Connecting to the car battery or to the cigarette lighter suggests itself here.

In recent years power supply by means of solar cells, especially in the leisure area, has become increasingly popular. Schego pumps in conjunction with solar cells are very well suited for this application and have proven themselves.

---

air output 260 l/h

type of current 600 mA

cable lenght 1,0 m

case 170 x 75 x 60 mm

---

air output 180 l/h

type of current 380 mA

cable lenght 1,0 m

case 153 x 75 x 82 mm

---

---